On-site repairs across England & Wales

Service Maintenance intervals for your
HP HP Designjet Z6 Pro & Z9 Pro printer

In some segments of the printer market, the customer tends to print more than the maximum number of prints that the throughput allows, exceeding by far the limit of the design. When this happens the customer runs into print quality problems and continuous printer failures.

 

The purpose of scheduled preventive maintenance is to avoid these failures – ensuring a good performance during all the product life.

Service Intervals ...

Preventive maintenance kits are designed to replace high-usage parts before they fail, avoiding printer downtime.

 

Under normal usage conditions, it will be approximately 5 years before the printer needs maintenance. If the printer is used more than the normal usage conditions, then it will need maintenance service much more frequently.

 

Each PMK have assigned an internal counter to count the number of cycles.

 

Once one of the maintenance advised messages is displayed, the relevant preventive maintenance kit must be used to replace the most worn parts of the printer.

 

With 20 years experience we can support all HP Designjet printers:

  • HP Designjet Z6 Pro, Z9 Pro
  • Belt+ Belt Tensioner Assy (Idle Pulley +gauge)
  • Back Slider Bearings
  • ROD Bushings
  • PRS2P (cam, follower & spring)
  • Oiler
  • Left Spittoon
  • Scraper Assembly and
  • Absorber Foams
    Clean / Check (not included in service kit)
  • Encoder Strip
  • Line Sensor
  • Spectrophotometer and actuator
  • Belt+ Belt Tensioner Assy (Idle Pulley +gauge)
  • Back Slider Bearings
  • ROD Bushings
  • PRS2P (cam, follower & spring)
  • Oiler
  • Left Spittoon
  • Scraper Assembly and Absorber Foams
  • Scan Axis Motor Poly-V and Support
  • Ink Line Tubes

User maintenance:

  • Carriage rod cleaning and lubricating (Mandatory)
  • Cleaning the Paper advance sensor, Encoder strip and Platen (Mandatory)
  • Cleaning printheads, printhead connections (Sometimes, if the PH has been rejected)
  • Performing the Automatic Printhead Alignment Calibration (If not done regularity)
  • Replacing the printheads or the Maintenance cartridge (Only if close to end of life)

PMK4 is a preventive maintenance action to prevent left spittoon overflow that will only trigger on specific printing workflows of Plain, Coated or Heavy weight papers wider than 44 inches. In all other cases, the left spittoon is replaced with PMK1 and PMK2 so PMK4 is not needed.

Independent Experts
We are independent of any manufacturer, allowing us to provide flexible support solutions. 
Genuine Spare Parts
We only use genuine OEM spare parts sourced from authorised HP distributors.
No Call Centres!
When you call us you can be assured that your enquiry will be dealt with by an experienced technician.

Supported Printers

  • HP Designjet Z6 PRO
  • HP Designjet Z9 PRO

Get in touch ...

    HP Designjet Z6 & Z9 PRO

    Service Maintenance Intervals

    Get in touch

    Book a repair or service...

    Fill in the form

    Get a Quote

    Have you got any questions 

    Feel free to contact us, and we will be more than happy to answer all of your questions.

    Privacy Overview

    This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.